TROMjaro XFCE joins and takes over the party

tromjaro/xfce/live-overlay/etc/default/grub

@@ -0,0 +1,51 @@
+
+GRUB_DEFAULT=saved
+GRUB_TIMEOUT=5
+GRUB_DISTRIBUTOR="TROMjaro"
+GRUB_CMDLINE_LINUX_DEFAULT=""
+GRUB_CMDLINE_LINUX=""
+
+# If you want to enable the save default function, uncomment the following
+# line, and set GRUB_DEFAULT to saved.
+GRUB_SAVEDEFAULT=true
+
+# Preload both GPT and MBR modules so that they are not missed
+GRUB_PRELOAD_MODULES="part_gpt part_msdos"
+
+# Uncomment to enable Hidden Menu, and optionally hide the timeout count
+#GRUB_HIDDEN_TIMEOUT=5
+#GRUB_HIDDEN_TIMEOUT_QUIET=true
+
+# Uncomment to use basic console
+GRUB_TERMINAL_INPUT=console
+
+# Uncomment to disable graphical terminal
+#GRUB_TERMINAL_OUTPUT=console
+
+# The resolution used on graphical terminal
+# note that you can use only modes which your graphic card supports via VBE
+# you can see them in real GRUB with the command `vbeinfo'
+GRUB_GFXMODE=auto
+
+# Uncomment to allow the kernel use the same resolution used by grub
+GRUB_GFXPAYLOAD_LINUX=keep
+
+# Uncomment if you want GRUB to pass to the Linux kernel the old parameter 
+# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx" 
+#GRUB_DISABLE_LINUX_UUID=true
+
+# Uncomment to disable generation of recovery mode menu entries
+GRUB_DISABLE_RECOVERY=true
+
+# Uncomment and set to the desired menu colors.  Used by normal and wallpaper 
+# modes only.  Entries specified as foreground/background.
+#GRUB_COLOR_NORMAL="light-blue/black"
+#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
+
+# Uncomment one of them for the gfx desired, a image background or a gfxtheme
+#GRUB_BACKGROUND="/usr/share/grub/trom-background.png"
+#GRUB_THEME="/boot/grub/themes/tromjaro-live/theme.txt"
+
+# Uncomment to get a beep at GRUB start
+#GRUB_INIT_TUNE="480 440 1"
+

tromjaro/xfce/live-overlay/etc/default/tlp

@@ -0,0 +1,221 @@
+# ------------------------------------------------------------------------------
+# tlp - Parameters for power save
+
+# Hint: some features are disabled by default, remove the leading # to enable them
+
+# Set to 0 to disable/1 to enable TLP
+TLP_ENABLE=1
+
+# Seconds laptop mode has to to wait after the disk goes idle before doing a sync.
+# Non-zero value enables, zero disables laptop mode.
+DISK_IDLE_SECS_ON_AC=0
+DISK_IDLE_SECS_ON_BAT=2
+
+# Dirty page values (timeouts in secs).
+MAX_LOST_WORK_SECS_ON_AC=15
+MAX_LOST_WORK_SECS_ON_BAT=60
+
+# Select a cpu frequency scaling governor: ondemand/powersave/performance/conservative
+# Important:
+# - You *must* disable your distribution's governor settings or conflicts will occur
+# - ondemand is sufficient for *almost all* workloads, you should know what you're doing!
+#CPU_SCALING_GOVERNOR_ON_AC=ondemand
+#CPU_SCALING_GOVERNOR_ON_BAT=ondemand
+
+# Set the min/max frequency available for the scaling governor.
+# Possible values strongly depend on your cpu. For available frequencies see
+# tlp-stat output, Section "+++ Processor".
+# Hint: Parameters are disabled by default, remove the leading # to enable them,
+#       otherwise kernel default values are used.
+#CPU_SCALING_MIN_FREQ_ON_AC=0
+#CPU_SCALING_MAX_FREQ_ON_AC=0
+#CPU_SCALING_MIN_FREQ_ON_BAT=0
+#CPU_SCALING_MAX_FREQ_ON_BAT=0
+
+# Set the cpu "turbo boost" feature: 0=disable / 1=allow
+# Requires an Intel Core i processor and kernel 3.7 or later.
+# Important:
+# - This may conflict with your distribution's governor settings
+# - A value of 1 does *not* activate boosting, it just allows it
+#CPU_BOOST_ON_AC=1
+#CPU_BOOST_ON_BAT=0
+
+# Minimize number of used cpu cores/hyper-threads under light load conditions
+SCHED_POWERSAVE_ON_AC=0
+SCHED_POWERSAVE_ON_BAT=1
+
+# Kernel NMI Watchdog
+# 0=disable (default, saves power) / 1=enable (for kernel debugging only)
+NMI_WATCHDOG=0
+
+# Change CPU voltages aka "undervolting" - Kernel with PHC patch required
+# Freq:voltage pairs are written to /sys/devices/system/cpu/cpu0/cpufreq/phc_controls
+# CAUTION: only use this, if you thoroughly understand what you are doing!
+#PHC_CONTROLS="F:V F:V F:V F:V"
+
+# Hard disk devices, separate multiple devices with spaces (default: sda).
+# Devices can be specified by disk id too (lookup with: tlp diskid).
+DISK_DEVICES="sda sdb"
+
+# Hard disk advanced power management level: 1(max saving)..254(off)
+# Levels 1..127 may spin down the disk.
+# Separate values for multiple devices with spaces.
+DISK_APM_LEVEL_ON_AC="254 254"
+DISK_APM_LEVEL_ON_BAT="254 254"
+
+# Hard disk spin down timeout:
+# 0:        spin down disabled
+# 1..240:   timeouts from 5s to 20min (in units of 5s)
+# 241..251: timeouts from 30min to 5.5 hours (in units of 30min)
+# (see 'man hdparm' for details)
+#DISK_SPINDOWN_TIMEOUT_ON_AC="0 0"
+#DISK_SPINDOWN_TIMEOUT_ON_BAT="0 0"
+
+# Select io scheduler for the disk devices: noop/deadline/cfq (Default: cfq)
+# Separate values for multiple devices with spaces.
+#DISK_IOSCHED="cfq cfq"
+
+# SATA aggressive link power management (ALPM):
+# min_power/medium_power/max_performance
+SATA_LINKPWR_ON_AC=max_performance
+SATA_LINKPWR_ON_BAT=min_power
+
+# PCI Express Active State Power Management (PCIe ASPM):
+# default/performance/powersave
+# Hint: needs kernel boot option pcie_aspm=force on some machines
+PCIE_ASPM_ON_AC=performance
+PCIE_ASPM_ON_BAT=powersave
+
+# Radeon graphics clock speed (profile method): low/mid/high/auto/default
+# auto = mid on BAT, high on AC; default = use hardware defaults
+# (Kernel >= 2.6.35 only, not with fglrx driver!)
+RADEON_POWER_PROFILE_ON_AC=high
+RADEON_POWER_PROFILE_ON_BAT=low
+
+# New radeon dynamic power management method (dpm): battery/performance
+# (Kernel >= 3.11 only, requires boot option radeon.dpm=1)
+RADEON_DPM_STATE_ON_AC=performance
+RADEON_DPM_STATE_ON_BAT=battery
+
+# New radeon dpm performance level: auto/low/high (auto is recommended)
+RADEON_DPM_PERF_LEVEL_ON_AC=auto
+RADEON_DPM_PERF_LEVEL_ON_BAT=auto
+
+# WiFi power saving mode: 1=disable/5=enable
+# (Linux 2.6.32 and later, some adapters only!)
+WIFI_PWR_ON_AC=1
+WIFI_PWR_ON_BAT=5
+
+# Disable wake on lan: Y/N
+WOL_DISABLE=Y
+
+# Enable audio power saving for Intel HDA, AC97 devices (timeout in secs).
+# A value of 0 disables / >=1 enables power save.
+SOUND_POWER_SAVE_ON_AC=0
+SOUND_POWER_SAVE_ON_BAT=1
+
+# Disable controller too (HDA only): Y/N
+SOUND_POWER_SAVE_CONTROLLER=Y
+
+# Set to 1 to power off optical drive in UltraBay (ThinkPads only)
+# when running on battery. A value of 0 disables this Feature (Default).
+# Drive can be powered on again by releasing (and reinserting) the
+# eject lever or by pressing the disc eject button on newer models.
+# Note: an UltraBay hard disk is never powered off.
+BAY_POWEROFF_ON_BAT=0
+# Optical drive device to power off (default sr0)
+BAY_DEVICE="sr0"
+
+# Runtime Power Management for pci(e) bus devices
+# (Kernel >= 2.6.35 only): on=disable/auto=enable
+RUNTIME_PM_ON_AC=on
+RUNTIME_PM_ON_BAT=auto
+
+# Runtime PM for *all* pci(e) bus devices, expect backlisted ones:
+# 0=disable / 1=enable
+# Warning: experimental option, could cause system instabilities
+RUNTIME_PM_ALL=0
+
+# Exclude pci(e) device adresses the following list from Runtime PM
+# (separate with spaces). Use lspci to get the adresses (1st column).
+#RUNTIME_PM_BLACKLIST="bb:dd.f 11:22.3 44:55.6"
+
+# Set to 0 to disable/1 to enable usb autosuspend feature
+USB_AUTOSUSPEND=1
+
+# Devices from the following list are excluded from usb autosuspend
+# (separate with spaces). Use lsusb to get the ids.
+# Note: input devices (usbhid) are excluded automatically
+#USB_BLACKLIST="1111:2222 3333:4444"
+
+# WWAN devices are excluded from usb autosuspend:
+# 0=do not exclude / 1=exclude
+# Note: works for ids 05c6:* 0bdb:* 1199:* only
+USB_BLACKLIST_WWAN=1
+
+# Set to 1 to disable autosuspend before shutdown/0 to do nothing
+# (workaround for usb devices that cause shutdown problems)
+#USB_AUTOSUSPEND_DISABLE_ON_SHUTDOWN=1
+
+# Restore radio device state (bluetooth, wifi, wwan) from previous shutdown
+# on system startup: 0=disable/1=enable
+# Hint: the parameters DEVICES_TO_DISABLE/ENABLE_ON_STARTUP/SHUTDOWN below
+#       are ignored when this is enabled!
+RESTORE_DEVICE_STATE_ON_STARTUP=0
+
+# Radio devices to disable on startup: bluetooth wifi wwan
+#DEVICES_TO_DISABLE_ON_STARTUP="bluetooth wifi wwan"
+
+# Radio devices to enable on startup: bluetooth wifi wwan
+#DEVICES_TO_ENABLE_ON_STARTUP="wifi"
+
+# Radio devices to disable on shutdown: bluetooth wifi wwan
+# (workaround for devices that are blocking shutdown)
+#DEVICES_TO_DISABLE_ON_SHUTDOWN="bluetooth wifi wwan"
+
+# Radio devices to enable on shutdown: bluetooth wifi wwan
+# (to prevent other operating systems from missing radios)
+#DEVICES_TO_ENABLE_ON_SHUTDOWN="wwan"
+
+# Radio devices to enable when wireless radio switch is turned on:
+# bluetooth wifi wwan (Ubuntu + ThinkPad only)
+#DEVICES_TO_ENABLE_ON_RADIOSW="wifi wwan"
+
+# Battery charge thresholds (ThinkPad only, tp-smapi or acpi-call kernel module required)
+# Charging starts when the remaining capacity falls below the START_CHARGE_TRESH
+# value and stops when exceeding the STOP_CHARGE_TRESH value.
+# Main battery (values in %)
+#START_CHARGE_THRESH_BAT0=75
+#STOP_CHARGE_THRESH_BAT0=80
+# Ultrabay or slice battery (values in %)
+#START_CHARGE_THRESH_BAT1=75
+#STOP_CHARGE_THRESH_BAT1=80
+
+# Set to 1 to disable use of tpacpi-bat on Sandy Bridge or newer Thinkpads
+# and force usage of tp-smapi instead
+#DISABLE_TPACPIBAT=1
+
+# ------------------------------------------------------------------------------
+# tlp-rdw - Parameters for the radio device wizard
+# Possible devices: bluetooth/wifi/wwan
+
+# Hint: parameters are disabled by default, remove the leading # to enable them
+
+# Radio devices to disable on connect
+#DEVICES_TO_DISABLE_ON_LAN_CONNECT="wifi wwan"
+#DEVICES_TO_DISABLE_ON_WIFI_CONNECT="wwan"
+#DEVICES_TO_DISABLE_ON_WWAN_CONNECT="wifi"
+
+# Radio devices to enable on disconnect
+#DEVICES_TO_ENABLE_ON_LAN_DISCONNECT="wifi wwan"
+#DEVICES_TO_ENABLE_ON_WIFI_DISCONNECT=""
+#DEVICES_TO_ENABLE_ON_WWAN_DISCONNECT=""
+
+# Radio devices to enable/disable when docked
+#DEVICES_TO_ENABLE_ON_DOCK=""
+#DEVICES_TO_DISABLE_ON_DOCK=""
+
+# Radio devices to enable/disable when undocked
+#DEVICES_TO_ENABLE_ON_UNDOCK="wifi"
+#DEVICES_TO_DISABLE_ON_UNDOCK=""
+

tromjaro/xfce/live-overlay/etc/environment

@@ -0,0 +1,19 @@
+#
+# This file is parsed by pam_env module
+#
+# Syntax: simple "KEY=VAL" pairs on separate lines
+#
+
+QT_AUTO_SCREEN_SCALE_FACTOR=1
+
+QT_QPA_PLATFORMTHEME="gnome"
+
+QT_STYLE_OVERRIDE="kvantum"
+
+# Force to use Xwayland backend
+# QT_QPA_PLATFORM=xcb
+
+#Not tested: this should disable window decorations
+# QT_WAYLAND_DISABLE_WINDOWDECORATION=1
+
+EDITOR=/usr/bin/nano

tromjaro/xfce/live-overlay/etc/fstab

@@ -0,0 +1,5 @@
+#
+# /etc/fstab: static file system information
+#
+# <file system>        <dir>         <type>    <options>          <dump> <pass>
+/dev/mapper/root-image /             auto      defaults           0      0

tromjaro/xfce/live-overlay/etc/issue

@@ -0,0 +1,13 @@
+
+Manjaro Live ISO (\l) - \s-\r \m
+
+
+
+                 # Welcome to TROMjaro #
+
+
+            login for the live environment:
+                   user     'tromjaro'
+                   password 'tromjaro'
+
+

tromjaro/xfce/live-overlay/etc/lightdm/lightdm-gtk-greeter.conf

@@ -0,0 +1,18 @@
+[greeter]
+font-name = Ubuntu Condensed, 13
+xft-antialias = true
+icon-theme-name = Zafiro
+screensaver-timeout = 60
+theme-name = vimix-dark
+cursor-theme-name = xcursor-breeze
+show-clock = false
+default-user-image = #manjaro
+xft-hintstyle = hintfull
+position = 50%,center 57%,center
+clock-format = 
+panel-position = bottom
+indicators = ~host;~spacer;~clock;~spacer;~language;~session;~a11y;~power
+hide-user-image = true
+keyboard = onboard
+a11y-states = ~keyboard
+background = #292b2e

tromjaro/xfce/live-overlay/etc/lightdm/lightdm.conf

@@ -0,0 +1,165 @@
+[Seat:*]
+#
+# General configuration
+#
+# start-default-seat = True to always start one seat if none are defined in the configuration
+# greeter-user = User to run greeter as
+# minimum-display-number = Minimum display number to use for X servers
+# minimum-vt = First VT to run displays on
+# lock-memory = True to prevent memory from being paged to disk
+# user-authority-in-system-dir = True if session authority should be in the system location
+# guest-account-script = Script to be run to setup guest account
+# logind-check-graphical = True to on start seats that are marked as graphical by logind
+# log-directory = Directory to log information to
+# run-directory = Directory to put running state in
+# cache-directory = Directory to cache to
+# sessions-directory = Directory to find sessions
+# remote-sessions-directory = Directory to find remote sessions
+# greeters-directory = Directory to find greeters
+# backup-logs = True to move add a .old suffix to old log files when opening new ones
+# dbus-service = True if LightDM provides a D-Bus service to control it
+#
+[LightDM]
+#start-default-seat=true
+#greeter-user=lightdm
+#minimum-display-number=0
+#minimum-vt=7 # Setting this to a value < 7 implies security issues, see FS#46799
+#lock-memory=true
+#user-authority-in-system-dir=false
+#guest-account-script=guest-account
+logind-check-graphical=true
+#log-directory=/var/log/lightdm
+run-directory=/run/lightdm
+#cache-directory=/var/cache/lightdm
+#sessions-directory=/usr/share/lightdm/sessions:/usr/share/xsessions:/usr/share/wayland-sessions
+#remote-sessions-directory=/usr/share/lightdm/remote-sessions
+#greeters-directory=$XDG_DATA_DIRS/lightdm/greeters:$XDG_DATA_DIRS/xgreeters
+#backup-logs=true
+#dbus-service=true
+
+#
+# Seat configuration
+#
+# Seat configuration is matched against the seat name glob in the section, for example:
+# [Seat:*] matches all seats and is applied first.
+# [Seat:seat0] matches the seat named "seat0".
+# [Seat:seat-thin-client*] matches all seats that have names that start with "seat-thin-client".
+#
+# type = Seat type (local, xremote)
+# pam-service = PAM service to use for login
+# pam-autologin-service = PAM service to use for autologin
+# pam-greeter-service = PAM service to use for greeters
+# xserver-command = X server command to run (can also contain arguments e.g. X -special-option)
+# xmir-command = Xmir server command to run (can also contain arguments e.g. Xmir -special-option)
+# xserver-config = Config file to pass to X server
+# xserver-layout = Layout to pass to X server
+# xserver-allow-tcp = True if TCP/IP connections are allowed to this X server
+# xserver-share = True if the X server is shared for both greeter and session
+# xserver-hostname = Hostname of X server (only for type=xremote)
+# xserver-display-number = Display number of X server (only for type=xremote)
+# xdmcp-manager = XDMCP manager to connect to (implies xserver-allow-tcp=true)
+# xdmcp-port = XDMCP UDP/IP port to communicate on
+# xdmcp-key = Authentication key to use for XDM-AUTHENTICATION-1 (stored in keys.conf)
+# greeter-session = Session to load for greeter
+# greeter-hide-users = True to hide the user list
+# greeter-allow-guest = True if the greeter should show a guest login option
+# greeter-show-manual-login = True if the greeter should offer a manual login option
+# greeter-show-remote-login = True if the greeter should offer a remote login option
+# user-session = Session to load for users
+# allow-user-switching = True if allowed to switch users
+# allow-guest = True if guest login is allowed
+# guest-session = Session to load for guests (overrides user-session)
+# session-wrapper = Wrapper script to run session with
+# greeter-wrapper = Wrapper script to run greeter with
+# guest-wrapper = Wrapper script to run guest sessions with
+# display-setup-script = Script to run when starting a greeter session (runs as root)
+# display-stopped-script = Script to run after stopping the display server (runs as root)
+# greeter-setup-script = Script to run when starting a greeter (runs as root)
+# session-setup-script = Script to run when starting a user session (runs as root)
+# session-cleanup-script = Script to run when quitting a user session (runs as root)
+# autologin-guest = True to log in as guest by default
+# autologin-user = User to log in with by default (overrides autologin-guest)
+# autologin-user-timeout = Number of seconds to wait before loading default user
+# autologin-session = Session to load for automatic login (overrides user-session)
+# autologin-in-background = True if autologin session should not be immediately activated
+# exit-on-failure = True if the daemon should exit if this seat fails
+#
+[Seat:*]
+#type=local
+#pam-service=lightdm
+#pam-autologin-service=lightdm-autologin
+#pam-greeter-service=lightdm-greeter
+#xserver-command=X
+#xmir-command=Xmir
+#xserver-config=
+#xserver-layout=
+#xserver-allow-tcp=false
+#xserver-share=true
+#xserver-hostname=
+#xserver-display-number=
+#xdmcp-manager=
+#xdmcp-port=177
+#xdmcp-key=
+greeter-session=lightdm-gtk-greeter
+#greeter-hide-users=false
+#greeter-allow-guest=true
+#greeter-show-manual-login=false
+#greeter-show-remote-login=true
+user-session=xfce
+#allow-user-switching=true
+#allow-guest=true
+#guest-session=
+session-wrapper=/etc/lightdm/Xsession
+#greeter-wrapper=
+#guest-wrapper=
+#display-setup-script=
+#display-stopped-script=
+#greeter-setup-script=
+#session-setup-script=
+#session-cleanup-script=
+#autologin-guest=false
+#autologin-user=
+#autologin-user-timeout=0
+#autologin-in-background=false
+#autologin-session=
+#exit-on-failure=false
+
+#
+# XDMCP Server configuration
+#
+# enabled = True if XDMCP connections should be allowed
+# port = UDP/IP port to listen for connections on
+# listen-address = Host/address to listen for XDMCP connections (use all addresses if not present)
+# key = Authentication key to use for XDM-AUTHENTICATION-1 or blank to not use authentication (stored in keys.conf)
+# hostname = Hostname to report to XDMCP clients (defaults to system hostname if unset)
+#
+# The authentication key is a 56 bit DES key specified in hex as 0xnnnnnnnnnnnnnn.  Alternatively
+# it can be a word and the first 7 characters are used as the key.
+#
+[XDMCPServer]
+#enabled=false
+#port=177
+#listen-address=
+#key=
+#hostname=
+
+#
+# VNC Server configuration
+#
+# enabled = True if VNC connections should be allowed
+# command = Command to run Xvnc server with
+# port = TCP/IP port to listen for connections on
+# listen-address = Host/address to listen for VNC connections (use all addresses if not present)
+# width = Width of display to use
+# height = Height of display to use
+# depth = Color depth of display to use
+#
+[VNCServer]
+#enabled=false
+#command=Xvnc
+#port=5900
+#listen-address=
+#width=1024
+#height=768
+#depth=8
+

tromjaro/xfce/live-overlay/etc/pacman.d/hooks/00-timeshift-autosnap.hook

@@ -0,0 +1,52 @@
+[Trigger]
+Operation = Upgrade
+Type = Package
+Target = kernel*
+Target = linux*
+Target = xorg*
+Target = systemd*
+Target = glibc*
+Target = xfce*
+Target = blueman*
+Target = hplip*
+Target = cups*
+Target = alsa*
+Target = archlinux*
+Target = bluez*
+Target = broadcom*
+Target = btrf*
+Target = dkms*
+Target = filesystem*
+Target = firmware*
+Target = flatpak*
+Target = grub*
+Target = lib*
+Target = manjaro*
+Target = mhw*
+Target = network*
+Target = pacman*
+Target = pacu*
+Target = pamac*
+Target = perl*
+Target = pipewire*
+Target = pulseaudio*
+Target = python*
+Target = tlp*
+Target = vala-panel*
+Target = wayland*
+Target = nvidia*
+Target = xfdesktop*
+
+[Trigger]
+Operation = Upgrade
+Type = Path
+Target = boot*
+Target = usr/lib*
+Target = dev*
+
+[Action]
+Description = Creating Timeshift snapshot before upgrade...
+Depends = timeshift
+When = PreTransaction
+Exec = /usr/bin/timeshift-autosnap
+AbortOnFail

tromjaro/xfce/live-overlay/etc/pam.d/su

@@ -0,0 +1,6 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+auth		sufficient	pam_wheel.so trust use_uid
+auth		required	pam_unix.so
+account		required	pam_unix.so
+session		required	pam_unix.so

tromjaro/xfce/live-overlay/etc/skel

@@ -0,0 +1 @@
+/home/tio/Custom-Manjaro/iso-profiles/tromjaro/xfce/desktop-overlay/etc/skel

tromjaro/xfce/live-overlay/etc/sudoers.d/g_wheel

@@ -0,0 +1 @@
+%wheel  ALL=(ALL) NOPASSWD: ALL

tromjaro/xfce/live-overlay/etc/timeshift-autosnap.conf

@@ -0,0 +1,29 @@
+#
+# /etc/timeshift-autosnap.conf
+#
+
+# skipAutosnap defines if timeshift-autosnap execution should be skipped.
+# Default value is false.
+skipAutosnap=false
+
+# skipRsyncAutosnap defines if timeshift-autosnap execution should be skipped on filesystems other than btrfs.
+# Default value is true.
+skipRsyncAutosnap=false
+
+# deleteSnapshots defines if old snapshots should be deleted.
+# Default value is true.
+deleteSnapshots=true
+
+# maxSnapshots defines how much old snapshots script should left.
+# Only positive whole numbers can be used.
+# Default value is 3.
+maxSnapshots=3
+
+# updateGrub defines if grub entries should be auto-generated.
+# If grub-btrfs package is not installed grub won't be generated.
+# Default value is true.
+updateGrub=true
+
+# snapshotDescription defines value used to distinguish snapshots created using timeshift-autosnap
+# Default value is "{timeshift-autosnap} {created before upgrade}".
+snapshotDescription={timeshift-autosnap} {created before upgrade}

tromjaro/xfce/live-overlay/root/.config/Kvantum/kvantum.kvconfig

@@ -0,0 +1,2 @@
+[General]
+theme=KvArcMaia

tromjaro/xfce/live-overlay/root/.config/qt5ct/qt5ct.conf

@@ -0,0 +1,24 @@
+[Appearance]
+color_scheme_path=
+custom_palette=false
+icon_theme=Papirus-Adapta-Maia
+style=kvantum
+
+[Fonts]
+fixed=@Variant(\0\0\0@\0\0\0\x12\0\x43\0\x61\0n\0t\0\x61\0r\0\x65\0l\0l@$\0\0\0\0\0\0\xff\xff\xff\xff\x5\x1\0\x32\x10)
+general=@Variant(\0\0\0@\0\0\0\x12\0\x43\0\x61\0n\0t\0\x61\0r\0\x65\0l\0l@$\0\0\0\0\0\0\xff\xff\xff\xff\x5\x1\0\x32\x10)
+
+[Interface]
+activate_item_on_single_click=1
+buttonbox_layout=0
+cursor_flash_time=1000
+dialog_buttons_have_icons=1
+double_click_interval=400
+gui_effects=@Invalid()
+menus_have_icons=true
+stylesheets=@Invalid()
+toolbutton_style=4
+wheel_scroll_lines=3
+
+[SettingsWindow]
+geometry=@ByteArray(\x1\xd9\xd0\xcb\0\x2\0\0\0\0\x1\x9a\0\0\0\x80\0\0\x3\xd6\0\0\x2\xff\0\0\x1\x9a\0\0\0\xa2\0\0\x3\xd6\0\0\x2\xff\0\0\0\0\0\0\0\0\x5V)