#

tromjaro/gnome/live-overlay/etc/calamares/settings.conf

@@ -0,0 +1,183 @@
+# Configuration file for Calamares
+# Syntax is YAML 1.2
+---
+# Modules can be job modules (with different interfaces) and QtWidgets view
+# modules. They could all be placed in a number of different paths.
+# "modules-search" is a list of strings, each of these can either be a full
+# path to a directory or the keyword "local".
+#
+# "local" means:
+#   - modules in $LIBDIR/calamares/modules, with
+#   - settings in SHARE/calamares/modules or /etc/calamares/modules.
+# In debug-mode (e.g. calamares -d) "local" also adds some paths
+# that make sense from inside the build-directory, so that you
+# can build-and-run with the latest modules immediately.
+#
+# Strings other than "local" are taken as paths and interpreted
+# relative to wherever Calamares is started. It is therefore **strongly**
+# recommended to use only absolute paths here. This is mostly useful
+# if your distro has forks of standard Calamares modules, but also
+# uses some form of upstream packaging which might overwrite those
+# forked modules -- then you can keep modules somewhere outside of
+# the "regular" module tree.
+#
+#
+# YAML: list of strings.
+modules-search: [ local ]
+
+# Instances section. This section is optional, and it defines custom instances
+# for modules of any kind. An instance entry has an module name, an instance
+# name, and a configuration file name. The primary goal of this mechanism is
+# to allow loading multiple instances of the same module, with different
+# configuration. If you don't need this, the instances section can safely be
+# left empty.
+#
+# Module name plus instance name makes an instance key, e.g.
+# "webview@owncloud", where "webview" is the module name (for the webview
+# viewmodule) and "owncloud" is the instance name. In the *sequence*
+# section below, use instance-keys to name instances (instead of just
+# a module name, for modules which have only a single instance).
+#
+# Every module implicitly has an instance with the instance name equal
+# to its module name, e.g. "welcome@welcome". In the *sequence* section,
+# mentioning a module without a full instance key (e.g. "welcome")
+# means that implicit module.
+#
+# An instance must specify its configuration file (e.g. `webview-home.conf`).
+# The implicit instances all have configuration files named `<module>.conf`.
+# This (implict) way matches the source examples, where the welcome
+# module contains an example `welcome.conf`.
+#
+# For more information on running module instances, run Calamares in debug
+# mode and check the Modules page in the Debug information interface.
+#
+# A module that is often used with instances is shellprocess, which will
+# run shell commands specified in the configuration file. By configuring
+# more than one instance of the module, multiple shell sessions can be run
+# during install.
+#
+# YAML: list of maps of string:string key-value pairs.
+#instances:
+#- id:       owncloud
+#  module:   webview
+#  config:   owncloud.conf
+
+# Sequence section. This section describes the sequence of modules, both
+# viewmodules and jobmodules, as they should appear and/or run.
+#
+# A jobmodule instance key (or name) can only appear in an exec phase, whereas
+# a viewmodule instance key (or name) can appear in both exec and show phases.
+# There is no limit to the number of show or exec phases. However, the same
+# module instance key should not appear more than once per phase, and
+# deployers should take notice that the global storage structure is persistent
+# throughout the application lifetime, possibly influencing behavior across
+# phases. A show phase defines a sequence of viewmodules (and therefore
+# pages). These viewmodules can offer up jobs for the execution queue.
+#
+# An exec phase displays a progress page (with brandable slideshow). This
+# progress page iterates over the modules listed in the *immediately
+# preceding* show phase, and enqueues their jobs, as well as any other jobs
+# from jobmodules, in the order defined in the current exec phase.
+#
+# It then executes the job queue and clears it. If a viewmodule offers up a
+# job for execution, but the module name (or instance key) isn't listed in the
+# immediately following exec phase, this job will not be executed.
+#
+# YAML: list of lists of strings.
+sequence:
+- show:
+  - welcome
+  - locale
+  - keyboard
+  - partition
+  - users
+  - summary
+- exec:
+  - partition
+  - mount
+  - unpackfs
+  - machineid
+  - fstab
+  - locale
+  - keyboard
+  - localecfg
+  - luksopenswaphookcfg
+  - luksbootkeyfile
+  - plymouthcfg
+  - initcpiocfg
+  - initcpio
+  - users
+  - displaymanager
+  - mhwdcfg
+  - networkcfg
+  - hwclock
+  - services
+  - grubcfg
+  - bootloader
+  - postcfg
+  - umount
+- show:
+  - finished
+
+# A branding component is a directory, either in SHARE/calamares/branding or
+# in /etc/calamares/branding (the latter takes precedence). The directory must
+# contain a YAML file branding.desc which may reference additional resources
+# (such as images) as paths relative to the current directory.
+#
+# A branding component can also ship a QML slideshow for execution pages,
+# along with translation files.
+#
+# Only the name of the branding component (directory) should be specified
+# here, Calamares then takes care of finding it and loading the contents.
+#
+# YAML: string.
+branding: tromjaro
+
+# If this is set to true, Calamares will show an "Are you sure?" prompt right
+# before each execution phase, i.e. at points of no return. If this is set to
+# false, no prompt is shown. Default is false, but Calamares will complain if
+# this is not explicitly set.
+#
+# YAML: boolean.
+prompt-install: false
+
+# If this is set to true, Calamares will execute all target environment
+# commands in the current environment, without chroot. This setting should
+# only be used when setting up Calamares as a post-install configuration tool,
+# as opposed to a full operating system installer.
+#
+# Some official Calamares modules are not expected to function with this
+# setting. (e.g. partitioning seems like a bad idea, since that is expected to
+# have been done already)
+#
+# Default is false (for a normal installer), but Calamares will complain if
+# this is not explicitly set.
+#
+# YAML: boolean.
+dont-chroot: false
+
+# If this is set to true, Calamares refers to itself as a "setup program"
+# rather than an "installer". Defaults to the value of dont-chroot, but
+# Calamares will complain if this is not explicitly set.
+# oem-setup: true
+
+# If this is set to true, the "Cancel" button will be disabled entirely.
+# The button is also hidden from view.
+#
+# This can be useful if when e.g. Calamares is used as a post-install
+# configuration tool and you require the user to go through all the
+# configuration steps.
+#
+# Default is false, but Calamares will complain if this is not explicitly set.
+#
+# YAML: boolean.
+disable-cancel: false
+
+# If this is set to true, the "Cancel" button will be disabled once
+# you start the 'Installation', meaning there won't be a way to cancel
+# the Installation until it has finished or installation has failed.
+#
+# Default is false, but Calamares will complain if this is not explicitly set.
+#
+# YAML: boolean.
+disable-cancel-during-exec: false